Dream Home Realized.
Click the image above and see the NetworkHD™ 600 Series 4K HDR over IP experience in residential applications - for homeowners that demand the very best in home entertainment.
Combining the ultimate in picture quality, the lowest latency over IP, and powerful scaling for mixed 4K and HD installs, the NetworkHD 600 Series is not only tailor-made for commercial applications, it's also perfectly at home in the home, with leading-edge features that support even the most demanding residential applications.
For those discerning clients that demand the absolute best picture quality without any image degradation whatsoever, the 600 Series is guaranteed to hit the mark with completely lossless transfer from source to display for an unparalleled visual experience.
The SDVoE platform standard and a 10 Gigabit backbone handle the delivery of 4K 60Hz 4:4:4 and HDR with HDCP 2.2 from the very latest AV sources with zero end-to-end latency and lightning-fast switch times.
As with any NetworkHD product, residential installations benefit from flexible inputs and outputs, which allow systems to be individually scaled to clients’ properties.
Genlock supports not only multichannel audio up to Dolby Atmos and DTS:X, but any known HDMI audio format. Audio embedding/de-embedding/breakaway and 8-channel audio downmixing provide the ultimate in flexibility, no matter whether a zone is stereo or surround-sound.
The enormous benefits offered by the 600 Series make it a flexible and highly expandable solution for AV distribution to audio, video and Home Cinema zones throughout a property that stands up to the most demanding consumer video content available today.
Click the image above to watch the video overview or the button below to go to the product page.
The ultimate rack mount solution for the ultimate in AVoIP.
WyreStorm NetworkHD™ 600 Series lossless 4K HDR over SDVoE gets a 7U rack mount kit housing up to eight components.
The NetworkHD™ 600 Series gets its very own home of its dreams with the NHD-000-RACK3 rack mount kit enabling easy, convenient and secure mounting of multiple 600 Series components within a standard 19inch AV/IT equipment rack.
Designed to optimize thermal dissipation, whilst offering superior NetworkHD rack install organization, the RACK3 features 8 slots capable of holding any combination of NHD-600-TX encoders, NHD-000-RX decoders, NHD-000-CTL NetworkHD controller or blanking plates.
Protruding less than 6 inches into an equipment rack enables a pair of RACK3 kits to be mounted back-to-back, for the potential housing of up to 16x NetworkHD components within a 7U height.
Its innovative “blade” design allows for quick insertion and removal of components without requiring the entire assembly to be pulled from of the rack - maximizing install and servicing efficiency by minimizing time on site as well as any system downtime.
600 Series encoders and decoders can be mounted with cable connections either front or rear facing for added install flexibility, with the sturdy all-steel design removing any chance of flex or sag when the rack kit is fully populated.
NHD-000-RACK3 at a Glance
IDEAL HEAT DISSIPATION
Vertical slot installation supports any combination of up to 8 NetworkHD 600 Series components or NHD-000-CTLs providing ideal component heat dissipation and airflow - a key factor in increasing reliability and product lifespan.
ALL STEEL DESIGN
Strong, steel enclosure construction keeps hardware secure and protected with units secured via brackets, rails and front panel screws.
STREAMLINE YOUR INSTALL
Specifically designed for organizing NetworkHD components within the main rack location, the NHD-000-RACK3
de-clutters the rack, improving cable management, port identification and unit access.
WE SHIP COMPLETE
All mounting hardware provided: rack, brackets, blanking plates, rails, lacing bar, handles and screws.
The NHD-000-RACK3 brings a professional, secure and flexible install environment to any NetworkHD 600 Series deployment while slashing labor time/cost on site and maintenance concerns.
The best AVoIP just got better. Click below to find out how.
Get to know our new HDMI/VGA/DisplayPort switching extender and scaler with relay triggering.
Click the image above to learn more about this smart switching HDBaseT presentation solution that maximizes any meeting.
These days, if you have meeting or huddle space, you need cost-efficient, easy to use presentation solutions to make the most of them.
Designed for corporate, education and government meeting environments, the new EX-SW-0301-H2 provides a smart-switching multi-connectivity extender solution that lets everyone get connected, get more out of meetings, and get rid of the expense and complexity of a control system.
Offering manual and automatic switching between any of its connected HDMI, VGA with audio and DisplayPort inputs, the EX-SW-0301-H2 delivers 4K to 35m or HD to 60m over HDBaseT; automatically scaling to display or projector capabilities.
Dual conditions-based relay triggering enable CEC, RS-232, IR and IP (TELNET) control to engagement based on transmitter auto-switching, as well as projector screens, curtains and blinds activation to create the ideal meeting environment in seconds.
With ease of user operation and valued-added functionality equally important, users can simply connect their devices to turn the system on and disconnect to switch off, or revert to the additional local HDMI input on the receiver to show digital signage.
The result is maximized participant productivity during meetings and maximized return on client investment when outside them. Now, that’s smart.
EX-SW-0301-H2 at a Glance
3-INPUT SWITCHING EXTENDER
As the latest addition to WyreStorm switching extender line-up, the EX-SW-0301-H2 brings features from our H2 product family into the huddle and meeting space products. Supporting HDCP2.2 and 4K/60 content, this smart switching extender accepts HDMI and DisplayPort sources with a VGA + audio input for legacy devices.
TWO CONDITION-BASED RELAYS BUILT INTO RECEIVER
With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.
SECONDARY RECEIVER INPUT
Meeting room not in use? The 0301 receiver can switch to its secondary HDMI input which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. This input can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.
HDBASET™ TRANSMISSION WITH SCALING RECEIVER
Rock-solid HDBaseT™ transmission ensures signal integrity from transmitter to receiver, with PoH being supplied in the opposite direction meaning the transmitter can be sited without concern of a power source. The receiver automatically scales incoming content to the capability of the connected screen, ensuring no signal drop-outs to interrupt the flow.
Click the top image to watch a video overview on the EX-SW-0301-H2 or click below to learn more.
Copyright © 2018 WyreStorm Technologies